Please note: This hotend is all metal, no plastic parts in the melt zone.
Hotend is equipped with NTC3950 thermistors and 12V 40W heaterNTC 3950 Thermistor parameters:
- Use TEMP SENSOR number 11 in Marlin firmware
- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25°C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter
- 1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
- 1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A.
- 1 x One Meter long Bowden tubing 4mm OD 2mm ID.
- 1 x PC4-01 Straight Pass-Through Fitting with 1/8" NPT threads, to connect to extruder cold end.
- 1 x Thermal Protection Silicone Sock.