V6 All Metal Hotend: Black Edition


  • Sale
  • Regular price $34.99

Part Number: V6B_12V



The All Metal V6 Hotend Black Edition is designed for reliable, high temperature 3D Printing up to 300° C. It features significant design changes to improve performance, and several component upgrades for utmost reliability. Supports a wide range of filaments including PLA, PETG, Polycarbonate and many more.

Product Features

Preassembled Hotend comes ready to use for a quick and easy installation. Saves time, hassle and potential mistakes that can otherwise impede best results.

Polished Titanium Heatbreak is precision machined from Titanium alloy. The polished V6 heatbreak provides a perfectly smooth inner bore and lower thermal conductivity compared to traditional stainless steel versions. This prevents clogs and jams as a result of heat creep.

Custom heatsink design. We re-designed bowden heatsink to accept low profile embedded tube collet similar to one used in CR10 Micro Swiss hotend. For direct drive heatsink we implemented internal PTFE tube through cold area, This allows to use same standard V6 titanium M7-to-M6 heatbreak part on both types of hotends. 

EPCOS Hex Thermistor is rated for working temperatures up to 300° C, it's assembled using premium fiberglass leads, M3 brass stud and high temp ceramic glue. Rather than use a set screw to clamp it in place, the thermistor threads directly in to the heater block for a safe and secure installation.

The optional silicone insulation ring fits over the M3 brass stud, shielding the exposed metal from airflow fluctuations and stabilizing the temperature readings.

EPCOS Firmware Documentation

The EPCOS Thermistor uses a TEMP_SENSOR_0 firmware value of "1". This is the default on most Creality 3D Printers. Other brands may require flashing firmware.

Silicone Sock fits snugly over the heater block, protecting the hotend from a build-up of plastic residue, while also insulating the metal components for stable printing temperatures. This helps contain radiating heat, allowing the nozzle to reach desired temps much faster than before.

Package Contents

  • (1) V6 All Metal Hotend (Black Edition)
  • (1) Polished Titanium Heatbreak (1.75mm)
  • (1) 40W Heater Cartridge with 1M Wiring
  • (1) M3 Hex Stud EPCOS Thermistor with 1M Wiring
  • (1) 0.4mm Nozzle
  • (1) Heatsink Shroud w/ High Speed Fan 3010 0.13A
  • (1) 1M Bowden Tubing 4mm OD 2mm ID
  • (1) PC4-01 Straight Pass-Through Fitting with 1/8" NPT threads
  • (1) V6 Silicone Sock
  • (1) Silicone Thermistor Insulation Ring

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)