Hotend is equipped with NTC3950 thermistors and 12V 40W heater, 12V fan. It is pre-assembled with all metal heatbreak and 0.4mm nozzle.
Get all necessary spare parts in one kit. Deluxe kit includes extra parts: 2 x extra heatbreaks, one all metal, anther one PTFE lined; piece of PTFE liner tubing for repairs; 3 x extra nozzles - 0.3mm, 0.4mm and 0.5mm; PC4-M6 and PC4-01 tube fittings for extruder cold end; Hex driver. Use all metal heatbreaks for higher melting point plastics and PTFE lined for easy print with PLA.NTC 3950 Thermistor parameters:
- Use TEMP Sensor number 11 in Marlin firmware.
- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25°C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter
- 1 x All Metal V6 hotend 1.75mm / 0.4mm nozzle / Fan 30mm 12V 0.13A with shroud
- 1 x One Meter long Bowden tubing 4mm OD 2mm ID
- 1 x PC4-M6 Tube Fitting
- 1 x PC4-01 Tube Fitting
- 1 x V6 Hotend compatible nozzle 0.3mm
- 1 x V6 Hotend compatible nozzle 0.4mm
- 1 x V6 Hotend compatible nozzle 0.5mm
- 1 x All metal heatbreak for 1.75mm
- 1 x PTFE lined heatbreak for 1.75mm
- 1 x piece of PTFE liner tubing for repairs
- 1 x Hex driver.
- 1 x Thermal Protection Silicone Sock