3-Point Heated Bed Upgrade for Creality Ender 3 and Ender 5 3D Printers

Regular price $59.99 | Save $-59.99 (Liquid error (sections/product-template line 234): divided by 0% off)

  • 235x235mm Heated Bed Upgrade for Creality Ender 3 and Ender 5 3D printers
  • 24V 275W Silicone Heater reaches temperatures faster than stock PCB beds
  • Aluminum build plate is precisely machined within +/- 0.2mm flatness tolerance
  • Included JST-XH thermistor connector is a perfect match for Creality boards
  • Integrated strain relief tab securely fastens wires to prevent wear during use

Estimated Delivery Time is between and .


3/6/2024 -  24V Silicone heaters have been increased from 250 to 275 Watts.

Redesigned for modern Creality 3D printers, this is a drop-in heated bed upgrade for the Ender 3 and Ender 5 series. That includes the latest Ender 3 Neo, Neo V2, S1, S1 Pro and more. Please see the compatibility tab for a complete list.

This 235x235mm heated bed kit is a direct upgrade to the official Creality PCB beds. It includes a high quality CNC milled aluminum build plate and 24V 275W Silicone Heater for quick warm-up times. As the Creality 3D Printers are often shipped with defective build plates, the warped bed and deformed surfaces can be uneven and difficult to use, making it nearly impossible to achieve a perfectly leveled bed. 4-point bed leveling can often make these problems worse, further skewing the surface over time.

Our aluminum build plate is precision machined from 6061-T6 aluminum. It provides a flat and leveled print bed, with tight flatness tolerances of +/- 0.2mm during manufacturing.

While aftermarket silicone heaters traditionally have centered wiring, this can sometimes pose clearance issues on certain models with Y motor covers. To address that concern, the heater cables and strain relief bracket have been shifted to the back left corner, preventing wear and tear that can otherwise shorten the heaters lifespan.

24V Silicone Heater

The perfect match for Creality's 24V electrical system, no additional parts needed. This plug and play solution is a direct upgrade for the Ender series. Just swap out the cables with the original heated bed. 275W offers noticeably improved warm-up times and better heat distribution compared to stock. Recommended for most users.

  • Voltage: 24V
  • Wattage: 275W
  • Amps: 10.4A
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950

110V Silicone Heater

These high powered 110V 500W (AC) silicone heaters reach desired temperature in a fraction of the time. Running on mains voltage, either a Solid State Relay or Digital Controller must be used for switching (sold separately). Recommended for experienced users only.

  • Voltage: 110V
  • Wattage: 500W
  • Power Density: 6W / sq in.
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950
  • Integrated Thermal Switch: 150C

Warning: Mains electricity is high voltage and extremely dangerous. Please consult with a professional. Gulfcoast Robotics is not liable for any damage or injuries sustained from the use of this product.


    Package Contents

    • (1) Aluminum Build Plate 235 x 235 x 3mm
    • (1) 24V Silicone Bed Heater w/ 3M Adhesive Backing
    • (1) 1/2 inch PET wire sleeve 650mm long
    • (4) Zip ties


    Compatible 3D Printers

    • Creality Ender 3
    • Creality Ender 3 Pro
    • Creality Ender 3 V2
    • Creality Ender 3 V2 Neo
    • Creality Ender 5
    • Creality Ender 5 Pro

  • Creality Ender 3 S1 - requires Modular 3-Point Y Carriage for S1 / Pro
  • Creality Ender 3 S1 Pro - requires Modular 3-Point Y Carriage for S1 / Pro

    Customer Reviews

    Based on 33 reviews
    Nicholas Miller
    Excellent customer service

    Works great and good quality. Heats to 100* in under 7m, about a minute faster than stock. Mine wasn't super level but better than stock. Overall I'm very happy with the product. The customer service is excellent. I reached out with an issue and was replied with kind, concern and helpful solutions, 10/10. Would recommend. I'd probably buy the cast aluminum if I bought it again.


    Works well! Not sure if it’s better than the stock heater on my Ender 3v2 Neo, but it works well. Seems to heat up faster, but I’m not sure where the thermocouple is measuring. It’s not measuring the upper part of the plate, so…

    Todd Hall
    Great Kit!

    I've installed this on my S1 along with all of the linear rail upgrades. This heated plate is a huge upgrade from the stock bed! Thicker material, and the heater seems to work slightly faster than the stock.


    Superb quality - absolute precision, high grade materials, perfect finish. What more could you ask for?

    Christopher Dangerfield
    Great position for the cord

    I have this heater and the cast aluminum plate for my Ender 3 S1 Pro. The repositioning of the cords from the center to the side works great. Does not touch anything at all. The heater is much more consistent than stock. The cast plate is way way flatter than the stock. Another highly suggested upgrade!



    Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).

    Domestic Orders

    Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.

    International Orders

    All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.

    3-Point Heated Bed Upgrade for Creality Ender 3 and Ender 5 3D Printers

    What are you looking for?

    Your cart