Cast Aluminum Heated Bed for Ender 3 and Ender 5 3D Printers

Regular price $79.99 | Save $-79.99 (Liquid error (sections/product-template line 234): divided by 0% off)

  • Cast Aluminum Heated Bed Upgrade for Creality Ender 3 / Pro / V2 and Ender 5 / Pro
  • ATP5 Cast Aluminum offers superior flatness tolerances over stock Creality beds
  • 2-Pin JST-XH thermistor connector is plug and play for Creality boards
  • 24V 250W and 110V 500W Silicone Heaters available

Estimated Delivery Time is between and .


For those in search of a truly flat print surface, look no further than our 235x235mm Cast Aluminum Heated Bed for Ender 3 and Ender 5. CNC machined from 1/4" (6.5mm) thick ATP5 tooling plates, the flatness tolerances are superior to thin, cold rolled aluminum that comes stock on Creality 3D printers. Made in the USA.

Of course no heated bed is complete without a heat source. Choose between our standard 24V 250W silicone heater for a seamless, drop-in upgrade, or a high powered 110V 500W silicone heater for rapid warm-up times. Both options are made from high quality US silicone, include an industry standard 100K NTC3950 thermistor, and feature our integrated thermal protection switch configured to 150C. A preventative safety mechanism that prevents thermal runaway, shutting off power to the bed in the event of failure.


24V Silicone Heater

The perfect match for Creality's 24V electrical system, no additional parts needed. This plug and play solution is a direct upgrade for the Ender series, just swap out the cables with the original heated bed. 250W offers noticeably improved warm-up times and better heat distribution compared to stock. Recommended for most users.

  • Voltage: 24V
  • Wattage: 250W
  • Amps: 10.4A
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950
  • Integrated Thermal Switch: 150C

110V Silicone Heater

The high powered 500W 110V AC silicone heater reaches the desired temperature in a fraction of the time. Running on mains voltage, either a Solid State Relay or Digital Controller must be used for switching (sold separately). Recommended for experienced users only.

  • Voltage: 110V
  • Wattage: 500W
  • Power Density: 6W / sq in.
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950
  • Integrated Thermal Switch: 150C

Warning: Mains electricity is high voltage and extremely dangerous. Please consult with a professional. Gulfcoast Robotics is not liable for any damage or injuries sustained from the use of this product.


    Package Contents

    • (1) 235x235 ATP5 Cast Aluminum Build Plate
    • (1) Silicone Bed Heater w/ 3M Adhesive Backing (24V or 110V)
    • (1) 1/2" PET wire sleeve 650mm long
    • (4) Zip ties


    Compatible 3D Printers

    • Creality Ender 3
    • Creality Ender 3 Pro
    • Creality Ender 3 V2
    • Creality Ender 3 V2 Neo
    • Creality Ender 5
    • Creality Ender 5 Pro

  • Creality Ender 3 S1 - requires Modular 3-Point Y Carriage for S1 / Pro
  • Creality Ender 3 S1 Pro - requires Modular 3-Point Y Carriage for S1 / Pro

    Customer Reviews

    Based on 7 reviews
    Derrick Lopez Baez

    I installed it a few months ago in my K1. Had to change the thermistor connector. Great plate, nice and flat 👍

    Chris L.
    Completely Fixed!

    Wow, what an absolutely stellar product. Super easy to install. Really high-quality machining, lovely cables, and the silicone heater is a game-changer.
    Don't hesitate to try this out if your S1 bed crapped out like mine; this is a big step up from that. The price was super reasonable too!

    Great for sufferers of OCD!

    Face it, modern ABL will easily manage a warped bed - within reason. My stock Creality bed varied by about 0.2mm but it still printed fine. I can level the cast bed, with a magnetic sheet, to 0.05mm! Still prints great and seems to keep the temperature stable due to it's extra mass. If bed weight is important to you, this might not be the best upgrade - it definitely weighs more than stock.

    One tip: after applying the magnetic sheet, but before attaching the heater, I pressed the plate under a slab of marble with about 80 pounds of weight on it overnight. I'm not sure how much of a difference it makes, but it seems to me that it would flatten-out and variation in the magnetic sheet or adhesive.

    In short, I'm really pleased with the cast bed!

    Good stuff, troubles resolved.

    The plate came with undersized holes but after emailing gulfcoast I received a reply the next day regarding it. After issues were resolved the plate came out to be easily leveled. I would definitely buy another one If I get another printer.


    what can I say 1000% better then stock ender 3 v2 bed heat up times are so fast and supper flat and easy to lvl the bed also super happy what are you waiting for buy one (Just Take Your Time setting it up)



    Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).

    Domestic Orders

    Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.

    International Orders

    All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.

    Cast Aluminum Heated Bed for Ender 3 and Ender 5 3D Printers

    What are you looking for?

    Your cart