3-Point Heated Bed Upgrade for Creality Ender 3 5 and Pro 3D Printers

Regular price $54.99 | Save $-54.99 (Liquid error (sections/product-template line 234): divided by 0% off)

  • 235x235mm Heated Bed Upgrade for Creality Ender 3, Ender 5 and PRO models
  • 24V 250W Silicone Heater reaches temperatures faster than stock PCB beds
  • Aluminum build plate is precisely machined within +/- 0.2mm flatness tolerance
  • Included JST-XH thermistor connector is a perfect match for Creality boards
  • Integrated strain relief tab securely fastens wires to prevent wear during use

Estimated Delivery Time is between and .


24V Silicone heater has been increased from 200 to 250 Watts.

Designed as a drop-in replacement for the Ender 3, Ender 5 and Pro model 3D Printers, this 235x235mm heated bed kit is a direct upgrade to the official Creality PCB beds. It includes a high quality CNC milled aluminum build plate and 250W Silicone Heater for faster warm-up times.

As the Creality 3D Printers are often shipped with a defective build plate, the warped bed and deformed surfaces can be uneven and difficult to use, making it nearly impossible to achieve a perfectly leveled bed. Traditional 4-point bed leveling can even exacerbate the problem, further skewing the surface over time.

Our aluminum build plate is precision machined from 6061-T6 aluminum. It provides a flat and leveled print bed, with tight flatness tolerances of +/- 0.2mm during manufacturing.

Silicone heater features an internal safety switch to prevent thermal runaway, shutting off power to the heater in excess of 150C.


24V Silicone Heater

The perfect match for Creality's 24V electrical system, no additional parts needed. This plug and play solution is a direct upgrade for the Ender series, just swap out the cables with the original heated bed. 250W offers noticeably improved warm-up times and better heat distribution compared to stock. Recommended for most users.

  • Voltage: 24V
  • Wattage: 250W
  • Amps: 10.4A
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950
  • Integrated Thermal Switch: 150C

110V Silicone Heater

The high powered 500W 110V AC silicone heater reaches the desired temperature in a fraction of the time. Running on mains voltage, either a Solid State Relay or Digital Controller must be used for switching (sold separately). Recommended for experienced users only.

  • Voltage: 110V
  • Wattage: 500W
  • Power Density: 6W / sq in.
  • Wire Length: 700mm
  • Mounting: 3M 468MP Adhesive
  • Size: 235x235mm
  • Weight: 7.4 ounces
  • Thermistor: 100k NTC 3950
  • Integrated Thermal Switch: 150C

Warning: Mains electricity is high voltage and extremely dangerous. Please consult with a professional. Gulfcoast Robotics is not liable for any damage or injuries sustained from the use of this product.


    Package Contents

    • (1) Aluminum Build Plate 235 x 235 x 3mm
    • (1) 24V Silicone Bed Heater w/ 3M Adhesive Backing
    • (1) 1/2 inch PET wire sleeve 650mm long
    • (4) Zip ties


    Compatible 3D Printers

    • Creality Ender 3
    • Creality Ender 3 Pro
    • Creality Ender 3 V2
    • Creality Ender 3 V2 Neo
    • Creality Ender 5
    • Creality Ender 5 Pro

  • Creality Ender 3 S1 - requires Modular 3-Point Y Carriage for S1 / Pro
  • Creality Ender 3 S1 Pro - requires Modular 3-Point Y Carriage for S1 / Pro

    Customer Reviews

    Based on 20 reviews
    Hugh Messenger
    Thoroughly recommended

    Along with the 3 point leveling, this is absolutely the best upgrade I've made to my Ender 3 Pro(s). The plate is pretty much dead level, barely any meaningful deviation on a bed visualizer (compared to my three original Creality beds, that look like topographical maps of the Himalayas). Where before I could see my lead screw turning on first layers as the mesh compensation kicked in, with these beds there's virtually no compensation needed at all.

    The replacement heater gets to temp about twice as fast.

    Add the 3 point leveling, which really does make life a lot easier, and it's the perfect Ender 3 bed.

    Amazing product!

    The bed plate is amazing! I look away for a few seconds next thing I know, the bed is heated at the temperature I set within a few seconds or so. No more waiting at all! The only problem I had was one side was warped but I was able to fix it. The support was amazing though, they were very helpful, although I eventually figured it out. I would highly recommend getting this!

    Fantastic product, fantastic service.

    Absolutely fantastic service. I dun goofed and they were more than willing to accommodate for my mistakes. The product itself is absolutely stellar. Well machined, and improved my print quality substantially.

    John Glaeser
    Service was AMAZING, heated bed (and y-carriage) are a great upgrade!

    Brett and the team at Gulf Coast Robotics are amazing. They went out of their way to help with an original broken heated bed. The replacement went smoothly using the online manual. They even have an .stl for the handle (I also got a y-carriage for my E3S1P).
    The back story is that the y-carriage was backordered, and when I reached out for an availability, they had an extra shipment that they used to fill my order. Back up and running in just a few days. And NO MORE ELMER's Purple for me!
    Thanks again GCR team!

    Dustin Kight
    Great product, amazing customer support

    I had an issue with payment, emailed them and we got it sorted out very quickly. I got my package about a week later and everything felt solid and great. Installing the magnet for the PEI sheet was tricky but not bad. I learned some tricks that made adhering the silicone bed heater so much easier. Everything is so nice and feels so much better than the stock ender parts. It's like a brand new printer now and I'm excited.



    Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).

    Domestic Orders

    Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.

    International Orders

    All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.

    3-Point Heated Bed Upgrade for Creality Ender 3 5 and Pro 3D Printers

    What are you looking for?

    Your cart