The All Metal V6 Hotend Black Edition is designed for reliable, high temperature 3D Printing up to 300° C. It features significant design changes to improve performance, and several component upgrades for utmost reliability. Supports a wide range of filaments including PLA, PETG, Polycarbonate and many more.
Preassembled Hotend comes ready to use for a quick and easy installation. Saves time, hassle and potential mistakes that can otherwise impede best results.
Polished Titanium Heatbreak is precision machined from Titanium alloy. The polished V6 heatbreak provides a perfectly smooth inner bore and lower thermal conductivity compared to traditional stainless steel versions. This prevents clogs and jams as a result of heat creep.
Custom heatsink design. We re-designed bowden heatsink to accept low profile embedded tube collet similar to one used in CR10 Micro Swiss hotend. For direct drive heatsink we implemented internal PTFE tube through cold area, This allows to use same standard V6 titanium M7-to-M6 heatbreak part on both types of hotends.
EPCOS Hex Thermistor is rated for working temperatures up to 300° C, it's assembled using premium fiberglass leads, M3 brass stud and high temp ceramic glue. Rather than use a set screw to clamp it in place, the thermistor threads directly in to the heater block for a safe and secure installation.
The optional silicone insulation ring fits over the M3 brass stud, shielding the exposed metal from airflow fluctuations and stabilizing the temperature readings.
The EPCOS Thermistor uses a TEMP_SENSOR_0 firmware value of "1". This is the default on most Creality 3D Printers. Other brands may require flashing firmware.
Silicone Sock fits snugly over the heater block, protecting the hotend from a build-up of plastic residue, while also insulating the metal components for stable printing temperatures. This helps contain radiating heat, allowing the nozzle to reach desired temps much faster than before.
- (1) V6 All Metal Hotend (Black Edition)
- (1) Polished Titanium Heatbreak (1.75mm)
- (1) 40W Heater Cartridge with 1M Wiring
- (1) M3 Hex Stud EPCOS Thermistor with 1M Wiring
- (1) 0.4mm Nozzle
- (1) Heatsink Shroud w/ High Speed Fan 3010 0.13A
- (1) 1M Bowden Tubing 4mm OD 2mm ID
- (1) V6 Silicone Sock
- (1) Silicone Thermistor Insulation Ring
I decided to buy from GCR because of the helpful and informative posts I've seen from their staff on Reddit, which cuts through a lot of the fog around selecting and setting up products.
I was not disappointed. Their V6 hotend is high quality, and their support has been phenomenal. If you are on the fence about ordering from them, just do it. You won't be disappointed.
SHIPPING & RETURNS
Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).
Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.
All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.