3-Point Heated Bed Upgrade for Creality Ender 3 5 and Pro 3D Printers

Regular price $54.99 | Save $-54.99 (Liquid error (sections/product-template.liquid line 229): divided by 0% off)

/
  • 235x235mm Heated Bed Upgrade for Creality Ender 3, Ender 5 and PRO models
  • 24V 250W Silicone Heater reaches temperatures faster than stock PCB beds
  • Aluminum build plate is precisely machined within +/- 0.2mm flatness tolerance
  • Included JST-XH thermistor connector is a perfect match for Creality boards
  • Integrated strain relief tab securely fastens wires to prevent wear during use
00

Estimated Delivery Time is between and .

PRODUCT DETAILS

24V Silicone heater has been increased to 250W. 500W AC Heaters available upon request.

Designed as a drop-in replacement for the Ender 3, Ender 5 and Pro model 3D Printers, this 235x235mm heated bed kit is a direct upgrade to the official Creality PCB beds. It includes a high quality CNC milled aluminum build plate and 250W Silicone Heater for faster warm-up times.

As the Creality 3D Printers are often shipped with a defective build plate, the warped bed and deformed surfaces can be uneven and difficult to use, making it nearly impossible to achieve a perfectly leveled bed. Traditional 4-point bed leveling can even exacerbate the problem, further skewing the surface over time.

Our aluminum build plate is precision machined from 6061-T6 aluminum. It provides a flat and leveled print bed, with tight flatness tolerances of +/- 0.2mm during manufacturing.

Silicone heater features an internal safety switch to prevent thermal runaway, shutting off power to the heater in excess of 150C.

Aluminum Plate Features

  • 3mm thick anodized aluminum
  • Better flatness tolerances over stock beds
  • Scratch and fingerprint resistant due to anodizing 
  • Countersunk M4 Mounting Holes
  • Strain relief tab

Silicone Heater Features

  • Voltage: 24V
  • Wattage: 250 Watts
  • Internal overtemperature safety switch set to 150C
  • Wire Length: 700mm Cable
  • Mounting: 3M Adhesive Backing
  • Size: 235x235mm
  • Thermistor: 100k NTC 3950

CONTENTS

Package Contents

  • (1) Aluminum Build Plate 235 x 235 x 3mm
  • (1) 24V Silicone Bed Heater w/ 3M Adhesive Backing
  • (1) 1/2 inch PET wire sleeve 650mm long
  • (4) Zip ties

COMPATIBILITY

Compatible 3D Printers

  • Creality Ender 3
  • Creality Ender 3 Pro
  • Creality Ender 3 V2
  • Creality Ender 5
  • Creality Ender 5 Pro

REVIEWS

Customer Reviews

Based on 9 reviews
78%
(7)
22%
(2)
0%
(0)
0%
(0)
0%
(0)
S
Shaun Davis
UPDATE!

It turns out that my bed is still flat! One of my linear rails was just barely misaligned, not enough to see, but enough to raise and lower the right side of the bed as it moved. I’ve already changed the bed on that printer, but I can still use this one on another one of my printers! Overall, great product, great company!

M
Michael Goldbeck
A must have!

Anybody that owns a Creality Ender 5 pro MUST purchase this plate. Stop with the frustrations of trying to set up cheap junk that comes factory with the Ender 5 pro and go with this absolutely beautiful piece of engineering, design and craftsmanship for the ultimate, immediately noticeable, upgrade.

For further enhancement, add the glass plate. I have not had one single bad print since I have upgraded with Gulfcoast Robotics.

If that is not enough to convince you, then rest assured Gulfcoast Robotics support is top tier support as I have discussed many areas with Brett and have never had one unanswered question that can benefit basically upgrading my Ender 5 Pro strictly with Gulfcoast Robotic's parts and upgrade inventory. (unlike Creality themselves, who seem to ignore any question you ask)

Stop convincing yourself like I did, that you do not need this plate, because you do. It's that simple!

R
Robert Nixon
This is premium heater bed upgrade for the Ender 3 series at a budget price.

This is my third review of a Gulfcoast Robotics product, but I swear I’m not a shill. My Ender 3 v2’s bed wasn’t especially warped (the glass was), but it was very slow to warm up and I wanted to give three-point leveling a try, so I took a chance and bought the whole kit.

As others have said, the aluminum plate is a really flat and well-machined piece of aluminum. It’s also lightweight, I think I have pictures, I’ll try to remember to add them later.

The silicon heater pad is a big improvement over the wimpy Ender 3 v2 heater. With GCR’s 4mm borosilicate glass plate, the temperature comes up very quickly and with a PID recalibration, it holds a precise temperature. Much more stable than +/-1°, more like +/-0.05°. Going from 25-50°C takes less than a minute, and its PWM at about 20% active to hold that temperature. I have pictures of the temperature curve too, it made me pretty happy.

And like any good heater bed, it takes an annoyingly long time for this bed to cool back down to ambient temperature, especially with a glass plate.

This bed is worth buying just for 3-point leveling with GCR’s carriage, but it’s a worthwhile upgrade to the Ender 3 v2 just as a heater bed.

For anyone wondering, the fully assembled y-carriage with the heater bed, 4mm glass build plate, 3 bed leveling wheels, pulleys, etc. is just under 1.4Kg, which is about 100g less than the stock setup on the Ender 3 v2, if I’m not mistaken.

I do think some stickers would be a nice inclusion.

J
Jamie Kaye
Great product!

Item as described.

+ Really flat aluminum
+ no sharp edges
+ heating pad heats up much faster than stock.
+ fast shipping - not that they have much control, but they dropped it off to the carrier the next day.
- No stickers included. Almost took away a star for this (not really). Most other 3d printer upgrades that I ordered came with a sticker. The Gulf Coast Robotics logo is really neat and deserves a sticker at the very least. I spent a good five min double checking the packaging :)

S
Shane
Great upgrade option

I put this on over the weekend, and I've been really impressed. I don't have an auto leveler, so I use Mesh Bed leveling on my printer. This new build plate is really an improvement over the original Creality plate. Obviously, it's relative to how well I get the corners tuned in, but when I mesh level, I'm usually within about .1mm overall on the bed....-05 here, +.025 there. What impresses me the most is that when I get it dialed in, it gives me some amazing finish on my prints. I didn't think things could be so good!

The heater is fast, and it maintains temp +/- 1C most of the time I'm watching it. It's fast, and very even. I added a cork sheet under the heater to help 'trap' the heat and prevent drafting.

Great investment if you're doing 'commercial grade' parts on your printers. Also good for hobbyists, and if you're just getting started, this will remove some of the variables that can cause failed prints.

SHIPPING & RETURNS

Shipping

Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).

Domestic Orders

Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.

International Orders

All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.

3-Point Heated Bed Upgrade for Creality Ender 3 5 and Pro 3D Printers

What are you looking for?

Your cart