Print-Flex 2.0 PEI Magnetic Flex Plate for Creality Ender 3 and Ender 5 3D Printers

First layer adhesion is the best I have experienced so far. It’s also very easy to remove the part from the print bed after it has cooled down. I had no issues printing polycarbonate (blend) which is notorious for poor bed adhesion and warping. The magnets were also able to withstand the high bed temp of 110C with seemingly no degradation

Can’t believe I went this long without a pei sheet. Beats any experience I’ve had with glass and a glue stick. Easy to apply just try and work out any bubbles as it’s being laid down.

How I wish I would have purchased this before trying the Creality glass heatbed. Using this sheet my Ender 3 Pro is far more forgiving when it comes to adhesion; print removal is a snap, and it just works with no fuss. This is without a doubt one of the first purchases I would recommend if you have a stock Ender 3 pro (after bed springs!).

If you are VERY VERY short on cash and can only pay for ONE upgrade. This over boro glass is it. You can deal with the noise of the stock board, you can deal with frequent adjustment of weak bed springs, but this one will help you get adhesion all the time!!.
The boro glass will handle the issue with bed flatness, and this PEI sheet will stick to your print. No more bed adhesion issues.

I have 4 other printing surfaces (borosilicate/pei, polycarbonate, and garolite) that I used to switch between depending on what material I'm printing with, but I have yet to find a material that doesn't stick to this surface. even with my old PEI solution (borosilicate with PEI sheet) I had to prep the surface for certain materials but this texture allows even nylon to stick without prep.