Printable Addons for Modular 3-Point Y Carriage
GoPro Camera Mount
The Camera Mount is perfect for timelapse videos or live streaming to Octoprint. Mounted on the left side of the Modular 3-Point Y Carriage Plate, this working example is designed to fit GoPro cameras using the standard GoPro frame mount and fixed tilt screw.
Don't have a GoPro? Browse the remixed designs from our customers on Thingiverse, or create your own and share it with the world.
Bill of Materials
| Item No. | Description | Qty |
|---|---|---|
| 1 | Modular 3-Point Y Carriage | 1 |
| 2 | Camera mount arm (STL file) | 1 |
| 3 | Camera mount knob (STL file) | 1 |
| 4 | Camera mount post (STL file) | 1 |
| 5 | M5 Thumbscrew - comes with GoPro | 1 |
| 6 | M6 hex nut | 1 |
| 7 | M5 hex nut | 1 |
| 8 | M6x20mm hex head screw | 1 |
| 9 | GoPro Camera w/ standard mount | 1 |
| 10 | M4x6mm socket head screw | 3 |
| 11 | M4 toothlock washer | 3 |
Half Handle Bar
The half-width Handle Bar pairs perfectly with the camera mount. Located on the right side of the Modular 3-Point Y Carriage, the heated bed can be pulled to access prints while the plate is still hot.
Bill of Materials
| Item no. | Description | Qty |
|---|---|---|
| 1 | Modular 3-Point Y Carriage | 1 |
| 2 | Half width handle (STL file) | 1 |
| 3 | M4x6mm socket head screw | 2 |
| 4 | M4 toothlock washer | 2 |
Wide Handle Bar
Based on the popular Ender-3 Bed Handle, this design has been adapted to fit the Modular Ender-3 Y Carriage Plate. The Handle Bar makes it easy to slide the heated bed while it's hot, preventing burns and other injuries during use.
Bill of Materials
| Item no. | Description | Qty |
|---|---|---|
| 1 | Modular 3-Point Y Carriage | 1 |
| 2 | Wide handle bar (STL file) | 1 |
| 3 | M4x6mm socket head screw | 2 |
| 4 | M4 toothlock washer | 2 |
