The 110V 800W Silicone Heater is designed for 3D Printers with a 310x310mm heated bed, such as the Creality CR10 and CR10S, replacing the traditional PCB as a heating source. Compared to PCBs, silicone heaters reach temperature faster and feature better heat distribution at the edges of the build plate. The new feature in the November 2021 revision is an internal over-temperature protection switch that will shut the heater OFF as soon as the temperature reaches 150C.

The included 3M 468MP adhesive backing comes pre-applied, is rated up to 150° C for extended periods of use, and bonds exceptionally well to metal surfaces. Just peel and press for a quick and painless installation on a new or existing heated bed.

Our silicone heaters comes pre-wired with power cables and thermistor. We also sell complete kits in our store, which include a new 6061-T6 aluminum build plate.

Disclaimer: AC heaters require a solid state relay (SSR) purchased separately. Mains electricity is high voltage and extremely dangerous. Please consult with a professional. Gulfcoast Robotics is not liable for any damage or injuries sustained from the use of this product.

Silicone Heater Details

Voltage: 110V
Power rating: 800 Watts
Wiring: 700 mm
Mounting: 3M 468MP Adhesive Backing
Dimensions: 310 x 310 mm
Thermistor: NTC 3950 100K Thermistor

Thermistor Specifications

TEMP_SENSOR id 11 in Marlin firmware (Default)
High accuracy: 1%
Resistance value at 25°C=100K
Wiring length: 1 meter

Package Contents

(1) 110V 800W Silicone Heater (310 x 310mm)

110V 800W Silicone Heater for 310x310mm Heated Bed Upgrade Creality CR10 / CR10S 3D Printers