3.0mm/0.5mm Direct Feed Al Metal Jhead V6 Hotend for Reprap 3D Printer Prusa i3
Hotend is equipped with ALL Metal Heatbreak, NTC3950 thermistors and 12V 40W heater
This hotend is a replica of newest, popular V6 hotend. You can print high temperature melting point plastics such as polycarbonate and nylon with this hotend, it has no Teflon/PTFE parts in the high temperature zone.
NTC 3950 Thermistor parameters:
Thermistor temperature table for NTC 3950 is included now in Marlin firmware. Use temperature sensor #11.
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
1 x Metal J-Head hotend 3.0mm / 0.5mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A