Aluminum Round Heatbed MK3 for Kossel Delta Rostock RepRap 3D Printer 220mm Diam., 12V.
This heated bed made of 3 mm aluminum and it works as heat producer, heat spreader and print surface of Delta 3D printer such as Kossel Mini. You can print directly on it (use blue masking tape or kapton to improve adhesion), or you can put borosilicate glass on top.
Heat bed comes pre-wired, with resistor and LED soldered for your convenience. Please note: there is no thermistor installed on the board or included in the listing. Please, install your own thermistor - tape it to the bottom of the board with kapton tape.
Please see supplied drawing for dimensions and mounting hole pattern.
Dimensions 220mm diameter
Mounting hole diameter: 3.2mm
Material: Aluminum 3mm thick
Resistance: 1.6 Ohm
1 x MK3 Round Aluminum Heated Bed 220mm diameter for 12V Power.