Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot
Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot
Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot
Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot
Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot
Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot

Assembled CNC V3 Arduino Shield for A4988 / DRV8825 Stepsticks Router Mill Robot

Regular price $6.99 Sale

CNC V3 Arduino shield is a compact CNC controller with all necessary features to run small CNC router, engraver, laser or pick and place machine. Board is compatible with Arduino UNO and StepStrick A4988 or DRV8825 Drivers.

CNC V3 Shield features:
  • Can drive four axes: four receptacles for A4988, DRV8825 or other StepStick compatible drivers.
  • Easy to reach Reset push button.
  • Headers for XYZA steppers, XYZA end stops, spindle control, ESTOP.
  • Screw terminal block for power input.
  • Compatible with GRBL firmware.

Sketch code sample to run steppers:

# define EN 8 // stepper motor enable , active low # define X_DIR 5 // X -axis stepper motor direction control # define Y_DIR 6 // y -axis stepper motor direction control # define Z_DIR 7 // z axis stepper motor direction control # define X_STP 2 // x -axis stepper control # define Y_STP 3 // y -axis stepper control # define Z_STP 4 // z -axis stepper control / * // Function : step . function: to control the direction of the stepper motor , the number of steps . // Parameters : dir direction control , dirPin corresponding stepper motor DIR pin // stepperPin corresponding stepper motor " step " pin , Step number of step of no return value. * / void step (boolean dir, byte dirPin, byte stepperPin, int steps) { digitalWrite (dirPin, dir); delay (50); for (int i = 0; i digitalWrite (stepperPin, HIGH); delayMicroseconds (800); digitalWrite (stepperPin, LOW); delayMicroseconds (800); } } void setup () {// The stepper motor used in the IO pin is set to output pinMode (X_DIR, OUTPUT); pinMode (X_STP, OUTPUT); pinMode (Y_DIR, OUTPUT); pinMode (Y_STP, OUTPUT); pinMode (Z_DIR, OUTPUT); pinMode (Z_STP, OUTPUT); pinMode (EN, OUTPUT); digitalWrite (EN, LOW); } void loop () { step (false, X_DIR, X_STP, 200); // X axis motor reverse 1 ring, the 200 step is a circle. step (false, Y_DIR, Y_STP, 200); // y axis motor reverse 1 ring, the 200 step is a circle. step (false, Z_DIR, Z_STP, 200); // z axis motor reverse 1 ring, the 200 step is a circle. delay (1000); step (true, X_DIR, X_STP, 200); // X axis motor forward 1 laps, the 200 step is a circle. step (true, Y_DIR, Y_STP, 200); // y axis motor forward 1 laps, the 200 step is a circle. step (true, Z_DIR, Z_STP, 200); // z axis motor forward 1 laps, the 200 step is a circle. delay (1000); }
Package contents:
  • 1 x CNC V3 Shield with set of jumers