The EPCOS Thermistor is a perfect drop-in upgrade for Creality 3D Printers. It features a working temperature up to 300° Celsius, leads are insulated with fiberglass instead of PTFE, and an M3 threaded hex stud glued with a 600° C rated ceramic compound. This makes it the ideal choice for high temperature filaments such as Nylon, Polycarbonate and more.
- Creality Ender 2
- Creality Ender 3
- Creality Ender 3 Pro
- Creality Ender 3 V2
- Creality Ender 3 Max
- Creality Ender 5
- Creality Ender 5 Pro
- Creality CR10 / 10S
- Creality CR-10 S4
- Creality CR-10 S5
- Tevo Tornado
- M3 Hex EPCOS Thermistor
- Creality Extension cable w/ 2.54mm JST Plug (1 Meter Length)
I agree with all of the other 5 star reviews, but there is a overlooked feature that I feel deserves a mention. The ability to replace the thermistor without having to rerun the wire back to the mb. Just unplug it near the extruder and replace with a new one if needed.
This is the best upgrade I have found so far for my hot end. Make sure you do a PID tune when you swap it out. My only gripe is you smash it when you use the stock fan housing on the hot end but I eventually will update to a bullseye so I don't have that issue.
My stock thermistor was not reading right on my Ender 3, so I thought I would upgrade since I was replacing it. This is a well made part, and I feel much better about this than the way the stock version is held. I will say it took a little persuading to get the fan shroud back on the extruder, but it all worked out just fine.
Bought this to replace the glass bead thermistor, for the bead resistors kept breaking. Put this in, did a PID tune, and the heat curve was much smoother than any other glass bead thermistor. I highly recommend this as an upgrade.
I have an Ender 5+ and this wire struggles to reach the furthest point of my build plate. All of the cables I have almost no tension, but this one is the exception. Mounting the enclosure on the fan shroud with the Thermistor Upgrade was impossible since the thermistor gets in the way completely.
The Ender 5 Plus is not on the list of compatible 3D Printers for this very reason. It has a larger build volume than the Ender 5 / Ender 5 Pro and would require a longer 1.5-2m extension cable.
Gulfcoast Robotics ships Monday through Friday, excluding holidays. The shipping cut-off time is 11 A.M. Eastern Standard. Orders placed after the cut-off time will be shipped the following business day. All orders are fulfilled by our warehouse located in North Port, Florida (US).
Domestic orders are shipped via USPS using the service selected at checkout. Parcels that exceed the First Class weight limit of 15.9 oz will automatically use Priority Mail. Once your package has been processed, a Tracking Number will be provided. The Shipping Confirmation is sent via e-mail and/or SMS alerts, depending on the contact information specified at checkout.
All orders shipped to a destination outside of the United States are subject to the import duties, fees and taxes of the destination country. Delays in delivery may occur if your package is randomly selected by the Customs Department for inspection.We have no control over the process or additional charges associated with the delivery and important of your package into your country. We do not benefit in anyway from these charges and work closely with our carriers to ensure as few delays as possible.We are not responsible for any duties, fees, or taxes that are incurred during the delivery of your order/package.