Part Number: HEXTW
Easy to install Hex M3 Stud Thermistor features:
- working temperature limit of 280C due to high temp. industrial epoxy resin used.
- M3 stud threaded lenght is 3mm. This will allow to use shallower M3 threaded holes.
- Based on EPCOS 100K Thermistor B57560G1104F
- Use TEMP SENSOR number 1 in Marlin firmware
- Connector type: JST 2 pin connector, 2.5mm spacing.
- Hex Body length: 6mm
- Length of leads: 55mm
- 1 x Hex Thermistor based on NTC EPCOS B57560G1104F 100k Thermistor.
- 1 x JST Male connector with crimp-on pins.
- 1 x 1 meter long cable with JST connector on one side and dupont connectors (like for RAMPS) on other side.