The EPCOS Thermistor is a perfect drop-in upgrade for Creality 3D Printers. It features a working temperature up to 300° Celsius, leads are insulated with fiberglass instead of PTFE, and an M3 threaded hex stud glued with a 600° C rated ceramic compound. This makes it the ideal choice for high temperature filaments such as Nylon, Polycarbonate and more.
- Creality Ender 2
- Creality Ender 3 / PRO
- Creality Ender 5 / PRO
- Creality CR10 / 10S
- Creality CR-10 S4
- Creality CR-10 S5
- Tevo Tornado
- M3 Hex EPCOS Thermistor
- Creality Extension cable w/ 2.54mm JST Plug (1 Meter Length)
Customer ReviewsWrite a review
I have an Ender 5+ and this wire struggles to reach the furthest point of my build plate. All of the cables I have almost no tension, but this one is the exception. Mounting the enclosure on the fan shroud with the Thermistor Upgrade was impossible since the thermistor gets in the way completely.
The Ender 5 Plus is not on the list of compatible 3D Printers for this very reason. It has a larger build volume than the Ender 5 / Ender 5 Pro and would require a longer 1.5-2m extension cable.
My stock thermistor was not reading right on my Ender 3, so I thought I would upgrade since I was replacing it. This is a well made part, and I feel much better about this than the way the stock version is held. I will say it took a little persuading to get the fan shroud back on the extruder, but it all worked out just fine.
Bought this to replace the glass bead thermistor, for the bead resistors kept breaking. Put this in, did a PID tune, and the heat curve was much smoother than any other glass bead thermistor. I highly recommend this as an upgrade.